Skip to main content
VerifySkinCHECK • KNOW • USE SAFER

LOT & batch codes

What Is a LOT or Batch Code on Skincare and How Do You Check It?

A LOT code shows which factory batch a product came from. Where to find it, why box and bottle must match, and why it never proves a product real alone.

6 min read · Updated 25 Oct 2026

A LOT code (also called a batch code, B/N or batch number) is a short code of letters and numbers that a manufacturer prints or stamps on a product to show which production batch it came from. It lets a brand trace a product back to the day, line or factory where it was made. For you as a shopper it is one of the most useful things on the pack to look at — but a LOT code that looks right is never proof on its own that a product is original.

What does a LOT or batch code actually do?

Every time a factory makes a run of a cream, serum or sunscreen, that run gets an identifying code. If a problem is found later — contamination, a packaging fault, a recall — the brand uses the code to find exactly which units are affected. That is why official recall notices usually list specific batch numbers.

Each brand decides its own format. Some codes are four or five characters, some are ten or more; some mix letters and digits; some have a space or a dash. There is no single standard, so a code that "looks strange" is not automatically a warning sign, and a code that "looks normal" is not automatically safe.

Where do I find the LOT code on a skincare product?

Look for the words LOT, BATCH or B/N, or a short code that is clearly stamped on rather than printed as part of the design. The most common places:

  • Side or back of the bottle, often near the bottom edge.
  • Base of the bottle or jar — turn it upside down.
  • The sealed (crimped) end of a tube — the code is often pressed into the flat strip.
  • Box flap or bottom of the box — the end you open, or the base.
  • Next to the expiry date — LOT and EXP are often printed together on one or two lines.

The code is usually added by a separate machine after the main label is printed, so it may look slightly different in colour or font from the rest of the pack. That on its own is normal.

If you cannot find it, use good light and tilt the pack — embossed or laser-etched codes are hard to see straight on. VerifySkin's guide at /guide/manual-check shows the usual spots.

Why should the LOT on the box match the LOT on the bottle?

When a genuine product is packed at the factory, the container and its box are coded from the same batch. So for most brands, the LOT on the outer box and the LOT on the bottle, tube or jar should be the same — and so should the dates.

A mismatch can happen when:

  • someone put a different product into an old or copied box;
  • an expired product was re-boxed;
  • the box was printed separately by a counterfeiter.

A mismatch is a strong reason to stop and ask questions, but it is not proof by itself — a few brands code the box and the container differently. If they don't match, ask the seller to explain, compare with the brand's official photos, and keep the box, the product and your receipt.

Can a fake product have a real LOT code?

Yes. A LOT code is just ink. A counterfeiter can buy one genuine product and copy its code onto thousands of fakes, or copy a code from a photo online. This is why:

  • the same LOT code appearing on many units over a long time can actually be a warning sign;
  • a code that matches the brand's format only tells you the format is plausible;
  • a code that is in a record of genuine batches still does not prove that your unit came from that batch.

Look at how the code is applied, too. A genuine code is usually crisp and even. Be careful if it is smudged, scratched off, covered with a sticker, or looks re-printed on top of something else.

Can I work out the manufacture or expiry date from the LOT code?

Don't rely on it. Some brands do build a production date into their LOT code, but each brand uses its own method, methods change over time, and most are not published. Online "batch code decoders" guess, and a guess can be wrong by years — telling you an old product is fresh, or a fresh one is old.

Use the dates printed on the pack: MFG, EXP and the PAO symbol. If there are no clear printed dates, treat that as missing information, not something to calculate. VerifySkin follows the same rule: it shows a manufacture or expiry date only when it is printed on the pack or stated by a cited, reliable source — never worked out from a LOT code. Our guide at /guide/expiry explains how to read those dates.

How do I check a LOT code step by step?

  1. Find the LOT code on the container and on the box, and make sure they match.
  2. Write it down exactly as printed — watch the difference between 0 and O, 1 and I.
  3. Check that the printed EXP date is still ahead and the MFG date is before it.
  4. Look for official notices about the product or batch on /alerts.
  5. Run a LOT check on VerifySkin and read the whole result, including what could not be checked.

How VerifySkin can help

On /check/lot you choose the brand and type the LOT code. VerifySkin then checks:

  • whether the code fits the brand's documented LOT format, where a reliable format is known;
  • whether the batch is in its batch records, and whether it is recorded as recalled or as found on counterfeits;
  • official banned, recall and warning notices.

The result lists every check performed, the checks that could not be done, the sources and the limitations. If a batch is not in the records, the result says so plainly — that means "could not be confirmed", not "fake". Your LOT code stays private; shared result links never show it. A LOT check only counts if the product is identified or an official notice is found; otherwise it goes back to your weekly free checks. Checking is free for shoppers — every signed-in user gets a fair number of free checks each week. You can also check by photo or barcode.

A LOT check gives you an evidence-based risk result — not a guarantee that a product is genuine or fake.

Questions people also ask

My product has no LOT code at all. Does that mean it is fake?

Not necessarily, but it is a reason to be careful. Most cosmetics from established brands carry a batch code on the container, the box or both. Look closely in good light, including the base, the crimped end of a tube and the box flaps. If there is truly no code anywhere, ask the seller why, compare with the brand’s official photos, and consider buying from a more traceable source. A VerifySkin photo check records what is visible on the pack as evidence.

Part of the LOT code has rubbed off. Can I still check it?

Only if you can read every character with confidence. Guessing the missing letters can match the wrong batch and give you a misleading result. Try a phone torch held at an angle, or zoom in on a sharp photo. If the code appears on both the box and the container, read the clearer one and compare the two. A code that looks deliberately scratched off is itself a warning sign you can report privately at /report.

Two units I bought have the same LOT code. Is that a problem?

Usually not. Units made in the same production run share one LOT code, so two items bought from the same shop at the same time often match. It becomes a concern when you see the exact same code on many units over months or years from different sellers, especially alongside other warning signs such as a very low price or poor print quality, because copied codes are a common counterfeit pattern.

This guide is general information, not medical or legal advice. A check gives a risk result based on the evidence available — never a guarantee.